China Xq Serial Hydraulic Sucker Rod Elevator Power Tong Rod Tong

• After-sales Service: Replacement
• Warranty: 18months
• Certification: CE, RoHS, ISO 9001:2008
• Power Source: Hydraulic
• Operation Pressure: 12-18MPa
• Material: Alloy
• Model NO.: XQ29/1.8
• Sucker Rod Size: 1/2"-1.1/2"
• Torque: 1.8-3.3kn.M
• Transport Package: Plywood Box
• Origin: China
• HS Code: 8431431000

Product Description

Product Description

Hydraulic power tong is  used to make up and break out sucker rod thread in Well Service. This product has the following features:
1) The structure is compact ,concise and light. Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner.
2) The operating is briefness and convenience with die. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed .
3) Large low gear torque, especially suitable for the instance that is difficult to break out sucker rod thread

 

Product Parameters

 

Tubing Power Tong
Model			XQ29/1.8	XQ29/2.6	YQ48/2.5-I	YQ48/2.5IV
Size Range  (master tong)		Mm	16,19,22,25,29 48-60 tubing	16,19,22,25,29	12.7-28	12.7-28
		Inch	5/8-1.1/8 1.9-2.3/8 tubing	5/8-1.1/8	1/2,5/8,3/4,7/8,1,1.1/8	1/2,5/8,3/4,7/8,1,1.1/8
Size Range  (backup tong)		Mm	16,19,22,25,29 48-60 tubing	16,19,22,25,29	26-48	26-48
		Inch	5/8-1.1/8 1.9-2.3/8 tubing	5/8-1.1/8	1.050,1.315,1.660,1.90	1.050,1.315,1.660,1.90
Max Pressure		MPa	10	10	7-13.5	7-13.5
		Psi	1450	1450	1000-2000	1000-2000
Flow Rate		l/min	-	-	80-120	80-120
		gpm	-	-	20-30	20-30
Max torque	Hi. gear	kN.m	0.7	1.0	-	-
		ft.lbf	500	740	-	-
	Low gear	kN.m	1.8	2.6	1.6	3.3
		ft.lbf	1300	1900	1180	2500
Speed	Hi. gear	rpm	100	98	135	65
	Low gear	rpm	40	32	-	-
Size		Mm	543x334x404	670x383x490	850x380x460	850x380x460
		inch	21.4x13.1x15.9	26.4x15.1x19.3	33.5x15x18	33.5x15x18
Weight		Kg	105	100	170	170
		lb	230	220	370	370
NOTE: FOR OTHER SPECIFICATION AND MORE DETAILS, PLS CONTACT WITH US FREELY BY EMAIL

 

Safety Device

Hydraulic controlled safety protection device is applicable to XQ Well Servicing Power Tong, ZQ Pipe Power Tong and TQ Casing Power Tong, using patent technology, to do real-time and reliable protection to the power tong, guarantee the safety of the operators. Flexible shaft controlled safety protection device consists of flexible shaft controlled reversing valve, push and pull flexible shaft and safety door. The flexible shaft controlled reversing valve installed in oil inlet and outlet position. As long as the safety door opens, the power will stop working immediately through the push and pull flexible shaft drive flexible shaft controlled reversing valve; when the safety door is closed , the power tong can work normally, which realizes the linkage protection between the safety door and hydraulic circuit.

 

Torque Control Recorder

 

Torque control recorder of hydraulic power tongs (abbr. TPC) is a kind of torque signal treatment, control and record system. It may measure, show, record and control any torque in the period of tube makeup to ensure the optimal screw torque and save any chart data of every joint in tightening process in disc for query in the future. 1.2. TCP system is in corollary use with Casing/Tubing Tongs. It may realize automatic controls on screw torque of tube joints and ensure controlling screw torque of tube joint in a range recommended in API Standard. It may avoid thread gluing and tongs teeth damaging any tube because of over torque when tightening any tube joint so as to meet strict standards and requirements for tube down-hole