Spare Parts of Nov Mission and Xbsy Drilling Mud Centrifugal Pump

• Certification: CE, RoHS, ISO 9001:2008
• Power Source: Electric
• Applicable Medium: Mud
• Model NO.: 3x2x13 etc
• Material: Cast Steel
• Transport Package: Plywood Box
• Origin: China
• HS Code: 8413709990

Product Description

Casing of Centrifugal Pump

Comparing with ordinary pump, casing of this pump is more thicker and stonger for longer service life. Casing is concentric design type. The walls of a concentric casing are an equal distance from the impeller throughout the impeller circumstanace. The pump can pump streamline liquid, even cutwater. Annular flow channel could eliminate eddy current and cavitation, also could reduce the radial loadof bearing. Because the inlet diameter of the pump is reasonable, its suction pressure must be low. The sealing part of pump casing adopts groove structure to prevent liquid flow from separating from impeller

 

Impellers of Centrifugal Pump

 

The impeller of this pump is open style, so the phenomenon of backflow in the closed impeller can be eliminated. The impeller is designed to reduce eddy current, radial and axial loads so that the liquid can flow smoothly. Due to no need for high-pressure washing of general pump, the wearness of the pump casing is relatively small. This design of impeller allows fluid from the impeller to mix with the returned fluid to reduce wearness of pump. The open impeller has non-exposed impeller nut or shaft thread. After impeller installation, thread protectionn is realized by an O ring. Comparing with ordinary pump, this impeller design greatly improves the service life of pump.

Shaft and Shaft Sleeves

 

The bending degree can be reduced to the minimum when bearing heavy load as the diameter of the pump shaft is large, so as to prolong the life of packing correspondingly. When wearness is caused by packing, just need to replace the (ceramic) shaft sleeve instead of replacing the shaft. And it is not necessary to remove the shaft from the pump when replacing shaft sleeve and mechanical seal.

 

Outboard Bearing Housing

The gland of packing box integrates the function of sealing and stuffing box into a replaceable whole, and a bolt is installed on the split face corresponding to the stuffing box. The packing box can be sealed with packing or mechanical seal. The split design makes it easier to contact the shaft sleeve.

 

Mechanical Seal

 

This mechanical seal is made of high quality material with optimized design for good working performance. The mechanical seal has more than 10 driving plates, and its thickness is 25-50% thicker than other mechanical seals on the market. Therefore, the stress on the outer seat of the mechanical seal is reduced accordingly. All the metal parts of the seal are made of 316 stainless steel, the elastic material is made of fluorinated rubber, and the end faces of moving ring and static ring are made of tungsten carbide.

Explosion-Drawing

 

 

Spare Parts List

 

Item	Qty		Drawing No.	Mission Number		Spare part		Material		Weight (kg)
1*	1		See below	See below		Casing		QT600-3
1A	1		0602	10399-46-1		Gasket, Casing		Vellumoid		0.01
1B	12		0603	3932-61		Nut, Casing		Stl		0.05
1C	12		0604	3862-76		Stud, Casing		Stl		0.16
1D	1		0605	8505-04-01		Plug, Casing Drain		Stl		0.03
1E	1		0605	8505-04-01		Plug, Flush Line		Stl		0.03
2*	1		See below	See below		Impeller		QT600-3
2A	1		0607	19110-72		Seal, Impeller		Viton		0.002
2B	1		0608			Washer, Impeller		Stl		0.02
2C	1		0609			Bolt, Impeller Lock		Stl		0.15
3*#	1		0610	22223-01-30		Stuffing Box Mech.Seal		QT600-3		20
3*&	1		0611	20614-01-30		Stuffing Box, Packed		QT600-3		20
3A	2		0612	3861-117		Bolt, Stuffing Box		Stl		0.05
3B&	1		0613	19368-01		Grease Fitting		Brass		0.01
4	1		0614	20622A		Gland Assy, Packing		Stl 304		1
5A#	1		0615	22451-1		Seal, Mechanical		Tung/Tung		1
5A#	3		0616			Packing, Mechanical Seal		Kevlar		0.4
5A#	5		0617			Packing Seal		Kevlar		0.7
5A	1		0618			Collar Oiler		Bronze		0.3
6	2		0619	B3701A		Bolt Assy, Gland		Stl 304		0.15
7	1		0620	20612-02-33		Shaft		42CrMo		17
7A	1		0621	20943-04A		Sleeve, Shaft		38CrMoAl		1
7B	1		0622	4371-5-21		Key, Shaft		Stl		0.11
7C	1		0623	23444-01-72		Seal, Shaft Sleeve		Viton		0.005
7D	1		0624			Oil Retainer		Stl		0.8
8	1		0625	22210-1A		Deflector Assembly		Composite		0.4
9	1		0626	20618-12-1		Frame,Grease Lubricated		Cast iron		80
9C	1		0605	8505-04-01		Plug		Stl		0.033
9D	1		0627	8267-01		Breather		Stl		0.2
9G	3		0628	2538-1H		Bolt, Casing Jack		Stl		0.16
10A	1		0629	20626A		Cover, Inboard Bearing		Iron		2.6
10B	1		0630	20625		Gasket, I.B Bearing Cover		Vegetable fiber		0.01
10C	1		0631	20619-01		Oil Seal, I.B Bearing Cover		Buna-n		0.06
10D	2		0632	3861-1		Bolt, I.B Bearing Cover		Stl		0.03
10E	2		0633	3932-2		Nut, I.B Bearing Cover		Stl		0.007
10H	1		0613	19368-01		Grease Fitting		Brass		0.01
11	1		0634	20615-1		Bearing, Inboard		Vendor		2.1
12	1		0635	20624-01-01		Housing Outboard Bearing		Iron		6
12A	1		0636	7496-253		Seal, O.B Bearing Housing		Buna-n		0.01
12B	4		0637	3861-138		Bolts, O.B Bearing Housing		Stl		0.05
12C	2		0638	3932-62		Nut, O.B Bearing Housing		Stl		0.016
13	1		0639	20617A		Cover, Outboard Bearing		Iron		1.8
13A	1		0613	19368-01		Grease Fitting, O.B Brg. Cvr		Brass		0.01
13B	1		0640	7496-26		O Ring, O.B Bearing Cover		Buna-n		0.001
13C	1		0641	20619-02		Oil Seal, O.B Bearing Cover		Buna-n		0.04
13D	2		0642	3861-139		Bolts, O.B Bearing Cover		Stl		0.025
14	2		0643	20616-1		Bearing Outboard		Vendor		1.5
14A	1		0644	6124-4		Lockwasher,O.B Bearing		Stl		0.01
14B	1		0645	6123-4		Locknut O.B Bearing		Stl		0.22
Casings-includes studs,nuts & gasket
1*		1	0601-3213	19203-01-30A		Casing,3×2×13	QT600-3		55
1*		1	0601-4313	19205-01-30A		Casing,4×3×13	QT600-3		57
1*		1	0601-5414	19222-01-30A		Casing,5×4×14	QT600-3		85
1*		1	0601-6511	19122-01-30A		Casing,6×5×11	QT600-3		90
1*		1	0601-6514	19123-01-30A		Casing,6×5×14	QT600-3		95
1*		1	0601-8611	19763-01-30A		Casing, 8×6×11	QT600-3		97
1*		1	0601-8614	19117-01-30A		Casing,8×6×14	QT600-3		125
1*		1	0601-10814	20937-01-30A		Casing,10×8×14	QT600-3		155
Impellers
2*		1	0606-32YYY		19204-XX-30	Impeller,3×2×13	QT600-3		9
2*		1	0606-43 YYY		19206-XX-30	Impeller,4×3×13	QT600-3		12.5
2*		1	0606-54 YYY		19224-XX-30	Impeller,5×4×14	QT600-3		13
2*		1	0606-65 YYY		19121-XX-30	Impeller,6×5×11	QT600-3		14
2*		1	0606-65 YYY		19121-XX-30	Impeller, 6×5×14	QT600-3		18
2*		1	0606-86 YYY		19116-XX-30	Impeller,8×6×11	QT600-3		18
2*		1	0606-86 YYY		19116-A0-30	Impeller,8×6×14	QT600-3		20
2*		1	0606-108 YYY		21867-XX-30	Impeller,10×8×14	QT600-3		20